LTC1992-10IMS8#PBF
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 18.8kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1992 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 700μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 3.2MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Nominal Gain Bandwidth Product | 4MHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
LTC1992-10IMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Differential-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. Op amp rates 250μV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. A supply current of 700μA can be used to operate this linear amplifier. Keeping the voltage gain at 80dB is the best course of action. One of the advantages of this op amp is that it outputs Differential, Rail-to-Rail signals, which is one of its many advantages. There is a rating of 1 for the operating supply voltage of the buffer op amp. In order for the op amp resistance to remain within the 18.8kOhm range, the op amp should be tested.
LTC1992-10IMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 18.8kOhm
LTC1992-10IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992-10IMS8#PBF Instrumentational OP Amps applications.
- Non-polarized electrodes
- Large motor controllers
- Weighing systems
- Medical instruments
- Automotive sensors
- Portable electronic products powered by batteries
- Thermocouples
- High speed sample
- Communication
- Fission chambers
