LTC1992-1CMS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Resistance | 37.5kOhm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 700μA |
| Slew Rate | 1.5 V/μs |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3.5MHz |
| Gain Bandwidth Product | 3MHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.35V |
| Nominal Gain Bandwidth Product | 4MHz |
| Number of Amplifiers | 1 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC1992-1CMS8#PBF Overview
It is packaged in an MSOP-case that protects the operational amplifiers from damage. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 250μV voltage. A supply current of 700μA can be used to operate this linear amplifier. 80dB should remain the voltage gain. On this buffer amplifier, there are 1 circuits. On the buffer amps, there are 1 channels that can be used. It should not lower than 0°C to operate buffer amplifier. You should not use op amp above 70°C degrees. As a whole, there are 1 elements that make up this buffer amplifier. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12V. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.4V, it is recommended to keep it higher. It is recommended that you conduct this electronic part using the dual supply voltage of 5.5V. It is recommended to keep the instrumentation amplifier resistance within the range of 37.5kOhm. As you can see, the linear amplifier has 1 amplifiers.
LTC1992-1CMS8#PBF Features
80dB voltage gain
Resistance of 37.5kOhm
LTC1992-1CMS8#PBF Applications
There are a lot of Analog Devices, Inc. LTC1992-1CMS8#PBF Instrumentational OP Amps applications.
- Car stereo
- Vehicle electronics
- Proportional counter tubes
- Displayers for aircraft and air transportation control systems
- Industrial control system
- High speed sample
- Mobile phone
- PDA
- Polarized electrodes
- Automotive sensors
