LTC1992-1HMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 38kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1992 |
| Pin Count | 8 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Max Supply Current | 1mA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3 GHz |
| Gain Bandwidth Product | 3.2MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 4MHz |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1992-1HMS8#PBF Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Differential-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. Op amp rates 250μV as input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 700μA and 10 . 80dB should be the voltage gain. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Differential, Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. It is important that the op amp resistance stays within the range of 38kOhm.
LTC1992-1HMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 38kOhm
LTC1992-1HMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992-1HMS8#PBF Instrumentational OP Amps applications.
- Television broadcasting equipment
- Integrator circuits
- Fast A/D and D/A converters
- MP3
- Cinema or auditorium audio system
- RF cable systems
- Navigation
- Subtraction operation circuits
- Video conversion and routing
- High-frequency data acquisition systems
