LTC1992-2HMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 38kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1992 |
| Pin Count | 8 |
| Output Type | Differential, Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3.5MHz |
| Gain Bandwidth Product | 3.2MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Nominal Gain Bandwidth Product | 4MHz |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1992-2HMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Differential-types. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 250μV voltage. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureOperational amplifier can operate supply current at 700μA. It is recommended to keep the voltage gain at 80dB at all times. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential, Rail-to-Rail signals. It is important that the op amp resistance stays within the range of 38kOhm.
LTC1992-2HMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 38kOhm
LTC1992-2HMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992-2HMS8#PBF Instrumentational OP Amps applications.
- Semiconductor detectors
- Home audio systems
- Subtraction operation circuits
- Communication
- Power generator
- Navigation
- Automation control systems
- Radiation thermometry transducers
- Blood pressure sensors
- Weak signal detection
