LTC1992-2IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 37.5kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1992 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 700μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 3.2MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Nominal Gain Bandwidth Product | 4MHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1992-2IMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Differential-type. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 250μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 700μA , this buffer op amp will be able to operate. Voltage gain should remain at 80dB. In addition to outputting Differential, Rail-to-Rail signals, this op amp ic offers a number of other advantages. The op amp is rated for an operating supply voltage of 1. 37.5kOhm should be the range of resistance for the instrumentation amplifier.
LTC1992-2IMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 37.5kOhm
LTC1992-2IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1992-2IMS8#PBF Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Automotive sensors
- single/dual op amp sum and difference circuits
- Industrial applications including automation
- Scintillation detectors
- Integrator circuits
- High gain DC amplifier
- Information processing
- Strain gauges
- Semiconductor detectors
