LTC1992IMS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Resistance | 500MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 700μA |
| Max Supply Current | 1.5mA |
| Slew Rate | 1.5 V/μs |
| Common Mode Rejection Ratio | 69 dB |
| Current - Input Bias | 250pA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 4MHz |
| Gain Bandwidth Product | 3.2MHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 4MHz |
| Number of Amplifiers | 1 |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC1992IMS8#PBF Overview
Packaged in a MSOP case, the buffer op amp is ready to use. 8 pins are included on the operational amplifiers. There is an input offset voltage of 250μV for this buffer op amp. A supply current of 700μA can be used to operate this linear amplifier. 80dB should remain the voltage gain. This op amp ic has 1 circuits. 1 channels are available on the instrumentation amplifier. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. No temperature greater than 85°C should be used. There are a total of 1 elements in this linear amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 12V, and this is an excellent feature. The linear amplifier's supply voltage should be higher than 2.4V. The dual supply voltage of 5.5V should be used for the conduct of this electronic component. 500MOhm is the range in which the instrumentation amplifier resistance should lie. A total of 1 instrumentation amplifiers are present on the device.
LTC1992IMS8#PBF Features
80dB voltage gain
Resistance of 500MOhm
LTC1992IMS8#PBF Applications
There are a lot of Analog Devices, Inc. LTC1992IMS8#PBF Instrumentational OP Amps applications.
- Ultrasound transducers
- High-frequency data acquisition systems
- Car stereo
- Power control
- Medical imaging
- Vehicle electronics
- Digital cameras
- Information processing
- Signal operation
- Wireless base stations
