LTC201ACN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | LTC201 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 5V ±15V |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 125Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| On-state Resistance Match-Nom | 3.25Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 6.25 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 300ns |
| Normal Position | NC |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC201ACN#PBF Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around 0°C~70°C TA are extended for operation. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Try searching for LTC201 variants of the analog switch ic. In this multiplexer, the internal resistance is 125Ohm. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. The digital multiplexer has a low cost Dual supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages range from 5V.
LTC201ACN#PBF Features
4 Channels
Switch Circuit: SPST - NC
LTC201ACN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC201ACN#PBF Analog Switches & Multiplexers ICs applications.
- Power routing
- Avionics test equipment
- Communications systems
- Data Acquisition Systems
- PDAs
- Remote wireless modules
- RGB switches
- DSUs
- Wireless Local Loop
- Industrial control systems
