LTC202CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 5V ±15V |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| On-State Resistance (Max) | 125Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| On-state Resistance Match-Nom | 3.25Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 6.25 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height | 1.5mm |
| Length | 10.01mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC202CS#PBF Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around 0°C~70°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on SPST - NO switching circuits, these analog multiplexers work. Search with LTC202 if you are looking for analog multiplexer variants. This digital multiplexer has 125Ohm internal resistance. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Dual supply type digital switch with a low cost. The electrical part can be operated at 5V voltage levels.
LTC202CS#PBF Features
4 Channels
Switch Circuit: SPST - NO
LTC202CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC202CS#PBF Analog Switches & Multiplexers ICs applications.
- FTTH
- Audio signal routing
- Modems
- Communications systems
- Intelligent PBX
- RGB switches
- Ultrasound
- Wireless Local Loop
- Sample-and-hold systems
- Switching Systems
