Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Package / Case |
TSOT |
Number of Pins |
5 |
Packaging |
Tape and Reel |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Number of Elements |
1 |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
800μA |
Frequency (Max) |
7.5kHz |
Slew Rate |
2 V/μs |
Common Mode Rejection Ratio |
120 dB |
Current - Input Bias |
75pA |
Input Offset Voltage (Vos) |
500nV |
Bandwidth |
3MHz |
Gain Bandwidth Product |
3MHz |
Voltage Gain |
140dB |
Power Supply Rejection Ratio (PSRR) |
120dB |
Nominal Gain Bandwidth Product |
3MHz |
Number of Amplifiers |
1 |
Height |
900μm |
Length |
2.9mm |
Width |
1.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LTC2050CS5#TRMPBF Overview
It is packaged in an TSOT-case that protects the operational amplifiers from damage. The case in which buffer amplifier is delivered is called a Tape and Reel case. The buffer op amp includes 5 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500nV. As long as the supply current of the chip does not exceed 800μA, this op amp ic can operate. Keeping the voltage gain at 140dB is the best course of action. In total, there are 1 circuits on this buffer amplifier. Op amp ic has 1 channels. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. It is recommended that op amp be used at temperatures below 70°C. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 6V. Keeping the linear amplifier's supply voltage above 2.7V is recommended. On the linear amplifier, there are 1 amplifiers.
LTC2050CS5#TRMPBF Features
140dB voltage gain
LTC2050CS5#TRMPBF Applications
There are a lot of Analog Devices, Inc. LTC2050CS5#TRMPBF Instrumentational OP Amps applications.
- Signal filtering
- Car stereo
- Hand-held batteries
- Differentiator circuits
- Weak signal detection
- Vehicle electronics
- Power transmission
- Instrumentation
- Medical imaging
- Industrial control system