LTC2050HVCS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2050 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/+-5V |
| Number of Circuits | 1 |
| Current - Supply | 1mA |
| Slew Rate | 2V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage Gain-Min | 562000 |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
LTC2050HVCS8#PBF Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the Zero-Drift-type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. The buffer amp consists of 1 circuits in total. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a recommendation, this electronic component should be used with a power supply that can deliver 1mA. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 562000.
LTC2050HVCS8#PBF Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2050HVCS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2050HVCS8#PBF Instrumentational OP Amps applications.
- Video conversion and routing
- Logarithmic operation circuits
- Commercial audio systems
- Communication
- Strain gauges
- Subtraction operation circuits
- Mobile phone
- Laptop
- Computer workstations
- Hand-held batteries
