LTC2050HVIS5#TRMPBF

1 Channels 25pA 120 dB Instrumentational OP Amps SOT-23-5

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LTC2050HVIS5#TRMPBF
Package: SOT-23-5
Datasheet: PDF
Stock: 225
Description: 1 Channels 25pA 120 dB Instrumentational OP Amps SOT-23-5(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	SOT-23-5
Number of Pins	5
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	11V
Min Supply Voltage	2.7V
Operating Supply Current	1mA
Frequency (Max)	7.5kHz
Slew Rate	2 V/μs
Common Mode Rejection Ratio	120 dB
Current - Input Bias	25pA
Input Offset Voltage (Vos)	500nV
Bandwidth	3MHz
Gain Bandwidth Product	3MHz
Voltage Gain	140dB
Power Supply Rejection Ratio (PSRR)	120dB
Max Dual Supply Voltage	5.5V
Min Dual Supply Voltage	1.35V
Nominal Gain Bandwidth Product	3MHz
Height	900μm
Length	2.9mm
Width	1.75mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LTC2050HVIS5#TRMPBF Overview

The linear amplifier is packaged in a SOT-23-5 case. An 5-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 500nV. As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. Keeping the voltage gain at 140dB is the best course of action. A linear amplifier like this has 1 circuits on it. Op amp ic has 1 channels. The temperature should not be lower than -40°C for operational amplifier ics to operate. No temperature greater than 85°C should be used. For the operating supply voltage of the op amp ic, there is a rating of 1. The electrical part is capable of being powered by a voltage of under 11V, which means that it can be used with any voltage supply. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 5.5V.