LTC2051HVCS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1mA |
| Max Supply Current | 2.6mA |
| Slew Rate | 2 V/μs |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 90pA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 3MHz |
| Number of Amplifiers | 2 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC2051HVCS8#PBF Overview
Packaging for the buffer amplifier is in the form of a SOIC case. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 500nV. This op amp can operate from a supply current at 1mA. There should be no change in the voltage gain at 140dB. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. At temperatures greater than 70°C, op amp should not be used. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. Under 11V is the minimum supply voltage for this electric component. Keeping the linear amplifier's supply voltage above 2.7V is recommended. As a general rule, you should conduct this electronic component under dual supply voltages of 5.5V volts. In total, there are 2 op amps on the device.
LTC2051HVCS8#PBF Features
140dB voltage gain
LTC2051HVCS8#PBF Applications
There are a lot of Analog Devices, Inc. LTC2051HVCS8#PBF Instrumentational OP Amps applications.
- Commercial audio systems
- Home audio systems
- pH (acidity)
- Blood pressure sensors
- Television
- PDA
- Logarithmic operation circuits
- Professional videography
- Scintillation detectors
- Tablets
