LTC2051HVIMS10#PBF
| Parameters | |
|---|---|
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Nominal Gain Bandwidth Product | 3MHz |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2051 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 3mA |
| Slew Rate | 2V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 90pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Input Offset Voltage (Vos) | 500nV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
LTC2051HVIMS10#PBF Overview
Op amp is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 10. There are a total of 10 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 10 pins. In terms of the input offset voltage, instrumentation amplifier rates at 500nV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. A supply current of 1mA can be used to operate this linear amplifier. A linear amplifier like this has 2 circuits on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.
LTC2051HVIMS10#PBF Features
10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2051HVIMS10#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2051HVIMS10#PBF Instrumentational OP Amps applications.
- Voltage regulation circuit
- Band-stop filter
- single/dual op amp sum and difference circuits
- Cinema or auditorium audio system
- Instrumentation
- Band-pass filter
- Industrial applications including automation
- Thermocouples
- Addition operation circuits
- Test equipment
