LTC2051IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC2051 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Operating Supply Current | 850μA |
| Supply Current-Max | 3mA |
| Slew Rate | 2V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~7V |
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 140dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Programmable Power | NO |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2051IDD#PBF Overview
A 8-WFDFN Exposed Pad case is used to package the op amp. Op amps are Zero-Drift types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 3μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 850μA. Voltage gain should remain at 140dB. There are a total of 2 channels available on the op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LTC2051IDD#PBF Features
8 Pins
supply voltage of 3V
140dB voltage gain
Output Type: Rail-to-Rail
LTC2051IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2051IDD#PBF Instrumentational OP Amps applications.
- RF cable systems
- single/dual op amp sum and difference circuits
- Scintillation detectors
- Micro signal measurement
- Portable electronic products powered by batteries
- Power generator
- Laptop
- Logarithmic operation circuits
- Mobile phone
- Portable media players
