LTC2051IMS10#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2051 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 850μA |
| Supply Current-Max | 3mA |
| Slew Rate | 2V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~7V |
| Input Offset Voltage (Vos) | 500nV |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2051IMS10#PBF Overview
Op amp is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. Op amps are Zero-Drift types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 10 mark. A total of 10 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 10 pins. The input offset voltage is 500nV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 850μA . A linear amplifier like this has 2 circuits on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A voltage rating of 2 is indicated for the op amp's operating supply voltage.
LTC2051IMS10#PBF Features
10 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC2051IMS10#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2051IMS10#PBF Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Addition operation circuits
- Video conversion and routing
- Tablets
- Integrator circuits
- High gain DC amplifier
- Portable docking station
- Blood pressure sensors
- Biopotential
- PDA
