LTC2051IMS8
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 255 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LTC2051 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 850μA |
| Supply Current-Max | 3mA |
| Slew Rate | 2V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Chopper (Zero-Drift) |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~7V |
| Input Offset Voltage (Vos) | 500nV |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LTC2051IMS8 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. Op amps are Chopper (Zero-Drift) types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 8 pins. Op amp ic rates 500nV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 850μA. There are 2 circuits on this op amp. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The op amp is rated for an operating supply voltage of 2.
LTC2051IMS8 Features
8 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC2051IMS8 Applications
There are a lot of Linear Technology/Analog Devices LTC2051IMS8 Instrumentational OP Amps applications.
- Test and measurement instruments
- Wireless base stations
- Differentiator circuits
- Large motor controllers
- Television
- Tablets
- High-frequency data acquisition systems
- Radiation thermometry transducers
- Broadcasting
- Industrial applications including automation
