LTC2051IMS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 850μA |
| Slew Rate | 2 V/μs |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Nominal Gain Bandwidth Product | 3MHz |
| Number of Amplifiers | 2 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC2051IMS8#PBF Overview
There is a MSOP case in which the instrumentation amplifier is packaged. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 500nV. A supply current of 850μA can be used to operate this linear amplifier. The buffer amp consists of 2 circuits in total. Op amp ic has 2 channels. Using this buffer op amp requires a temperature of at least -40°C. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 6V. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. The buffer amplifier consists of 2 amplifiers.
LTC2051IMS8#PBF Features
LTC2051IMS8#PBF Applications
There are a lot of Analog Devices, Inc. LTC2051IMS8#PBF Instrumentational OP Amps applications.
- Signal transformation
- Industrial control system
- Precision measurement
- Radar
- Biopotential
- Hand-held batteries
- Comparator
- Weak signal detection
- Television broadcasting equipment
- Proportional operation circuits
