LTC2051IS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Voltage | 5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 850μA |
| Max Supply Current | 2.4mA |
| Frequency (Max) | 7.5kHz |
| Slew Rate | 2 V/μs |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.35V |
| Nominal Gain Bandwidth Product | 3MHz |
| Number of Amplifiers | 2 |
| Height | 1.752mm |
| Length | 5mm |
| Width | 3.988mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC2051IS8#PBF Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. There are 8 pins on this chip. There is an input offset voltage of 500nV for this buffer op amp. A supply current of 850μA can be used to operate this linear amplifier. 140dB should be the voltage gain. The buffer amp consists of 2 circuits in total. The op amp ic has 2 channels on it. For this linear amplifier to work, the temperature should not be below -40°C. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 2 elements in this linear amplifier. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 6V. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.7V, it is recommended to keep it higher. As a general rule, you should conduct this electronic component under dual supply voltages of 5.5V volts. A total of 2 instrumentation amplifiers are present on the device.
LTC2051IS8#PBF Features
140dB voltage gain
LTC2051IS8#PBF Applications
There are a lot of Analog Devices, Inc. LTC2051IS8#PBF Instrumentational OP Amps applications.
- Communication
- Non-polarized electrodes
- Tablets
- Proportional counter tubes
- Active probe
- Automotive sensors
- Cinema or auditorium audio system
- High input resistance broadband
- Commercial audio systems
- Video amplifiers
