banner_page

LTC2052CS#PBF

4 Channels 75pA 120 dB Instrumentational OP Amps 9V SOIC


  • Manufacturer: Analog Devices, Inc.
  • Nocochips NO: 84-LTC2052CS#PBF
  • Package: SOIC
  • Datasheet: PDF
  • Stock: 162
  • Description: 4 Channels 75pA 120 dB Instrumentational OP Amps 9V SOIC(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Package / Case SOIC
Number of Pins 14
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Operating Supply Voltage 9V
Number of Elements 4
Number of Channels 4
Number of Circuits 4
Max Supply Voltage 6V
Min Supply Voltage 2.7V
Operating Supply Current 850μA
Max Supply Current 4.8mA
Slew Rate 2 V/μs
Common Mode Rejection Ratio 120 dB
Current - Input Bias 75pA
Input Offset Voltage (Vos) 500nV
Bandwidth 3MHz
Gain Bandwidth Product 3MHz
Voltage Gain 140dB
Power Supply Rejection Ratio (PSRR) 120dB
Max Dual Supply Voltage 5.5V
Min Dual Supply Voltage 1.35V
Dual Supply Voltage 5V
Nominal Gain Bandwidth Product 3MHz
Number of Amplifiers 4
Height 1.48mm
Length 8.74mm
Width 3.99mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

LTC2052CS#PBF Overview


It is packaged in an SOIC-case that protects the operational amplifiers from damage. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, buffer amplifier rates 500nV voltage. Using an 850μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 140dB is the best course of action. A instrumentation amplifier like this has 4 circuits. 4 channels are available on the instrumentation amplifier. To operate this buffer amplifier, the temperature must not be lower than 0°C. You should only use op amp buffer at temperatures that are no higher than 70°C. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 9V. I would like to point out that this electrical component is capable of working from a voltage below 6V as far as the power supply is concerned. The linear amplifier's supply voltage should be higher than 2.7V. This electronic part should be conducted with a dual supply voltage of 5.5V volts for this part. A total of 4 instrumentation amplifiers are present on the device.

LTC2052CS#PBF Features


140dB voltage gain

LTC2052CS#PBF Applications


There are a lot of Analog Devices, Inc. LTC2052CS#PBF Instrumentational OP Amps applications.

  • Cinema or auditorium audio system
  • Home audio systems
  • Wireless base stations
  • Television broadcasting equipment
  • Signal amplification
  • Non-polarized electrodes
  • ECG equipment
  • Test equipment
  • Proportional operation circuits
  • Voltage regulation circuit

Write a review

Note: HTML is not translated!
    Bad           Good