LTC2052IS#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 850μA |
| Max Supply Current | 4.8mA |
| Slew Rate | 2 V/μs |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 3MHz |
| Gain Bandwidth Product | 3MHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 3MHz |
| Number of Amplifiers | 4 |
| Height | 1.5mm |
| Length | 8.74mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC2052IS#PBF Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. It has 14 pins that make up the linear amplifier. There is an input offset voltage of 500nV for this buffer op amp. You can run this op amp ic on 850μA . There should be no change in the voltage gain. This op amp contains 4 circuits. Op amp ic has 4 channels. This instrumentation amplifier cannot operate below -40°C degrees Celsius. A temperature greater than 85°C should not be used for the operation of buffer amplifier. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6V. A high supply voltage of more than 2.7V is recommended for the instrumentation amplifier's supply voltage. This electronic part should be conducted with a dual supply voltage of 5.5V volts for this part. The buffer amplifier consists of 4 amplifiers.
LTC2052IS#PBF Features
140dB voltage gain
LTC2052IS#PBF Applications
There are a lot of Analog Devices, Inc. LTC2052IS#PBF Instrumentational OP Amps applications.
- Proportional operation circuits
- PDA
- Tablets
- pH (acidity)
- Differentiator circuits
- Wireless base stations
- Band-stop filter
- Automotive sensors
- Exponential operation circuits
- Multiplication circuits
