LTC2053IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2053 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Operating Supply Current | 950μA |
| Nominal Supply Current | 950μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 5μV |
| -3db Bandwidth | 0.2MHz |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Input Offset Current-Max (IIO) | 0.003μA |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2053IDD#PBF Overview
In the package, you will find a 8-WFDFN Exposed Pad-case to contain the op amp ic. Buffer amps of this type are called Zero-Drift-types. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 10μV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing a supply current of 950μA , this buffer op amp will be able to operate. On the buffer amps, there are 1 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LTC2053IDD#PBF Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2053IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2053IDD#PBF Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- High/low-pass filter circuit
- Industrial applications including automation
- Laptop
- Radar
- Tablets
- Measurements of Wheatstone bridge
- High gain DC amplifier
- Ultrasound transducers
- Vehicle electronics
