LTC2053IMS8-SYNC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2053 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 950μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 200kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 0.2MHz |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Nominal Gain Bandwidth Product | 200 kHz |
| Input Offset Current-Max (IIO) | 0.003μA |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC2053IMS8-SYNC#PBF Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Op amps are Zero-Drift types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Instrumentation Amplifier device, to be precise. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 5μV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 950μA can be used to operate this linear amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 1 elements in this buffer amplifier.
LTC2053IMS8-SYNC#PBF Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2053IMS8-SYNC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2053IMS8-SYNC#PBF Instrumentational OP Amps applications.
- Radar
- Commercial audio systems
- Scintillation detectors
- Addition operation circuits
- Fission chambers
- High speed sample
- Polarized electrodes
- Biopotential
- Laptop
- Cinema or auditorium audio system
