LTC2053IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2053 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Operating Supply Current | 950μA |
| Max Supply Current | 1mA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 0.2MHz |
| Nominal Gain Bandwidth Product | 200 kHz |
| Input Offset Current-Max (IIO) | 0.003μA |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2053IMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Instrumentation Amplifier device. Linear amplifier includes 8 pins. The input offset voltage is 5μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 950μA . Instrumentation amplifier has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 6V.
LTC2053IMS8#PBF Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2053IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2053IMS8#PBF Instrumentational OP Amps applications.
- pH (acidity)
- Strain gauges
- Blood pressure sensors
- E-book readers
- Semiconductor detectors
- Commercial audio systems
- Broadcasting
- Car stereo
- Oscilloscopes
- Television
