LTC2054CS5#TRMPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | TSOT |
| Number of Pins | 5 |
| Packaging | Cut Tape |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 140μA |
| Max Supply Current | 175μA |
| Slew Rate | 0.5 V/μs |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1pA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 500 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Nominal Gain Bandwidth Product | 500 kHz |
| Number of Amplifiers | 1 |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LTC2054CS5#TRMPBF Overview
Op amp is packaged in TSOT case. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape case. 5 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 500nV voltage. In order for this instrumentation amplifier to operate, the supply current needs to be between 140μA and 10 . There should be no change in the voltage gain at 140dB. On this buffer amplifier, there are 1 circuits. 1 channels are available on the instrumentation amplifier. The temperature should not be lower than 0°C for operational amplifier ics to operate. No temperature greater than 70°C should be used. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. I would like to point out that this electrical component is capable of working from a voltage below 6V as far as the power supply is concerned. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage. On the linear amplifier, there are 1 amplifiers.
LTC2054CS5#TRMPBF Features
140dB voltage gain
LTC2054CS5#TRMPBF Applications
There are a lot of Analog Devices, Inc. LTC2054CS5#TRMPBF Instrumentational OP Amps applications.
- Band-stop filter
- Switching amplifier
- earphone
- Power generator
- Medical imaging
- Weak signal detection
- Displayers for aircraft and air transportation control systems
- High gain DC amplifier
- Television
- Inverse/same-phase proportional circuit
