LTC2054HVHS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2054 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 175μA |
| Slew Rate | 0.5V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Input Offset Voltage (Vos) | 500nV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 500 kHz |
| Average Bias Current-Max (IIB) | 0.003μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | YES |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Nominal Gain Bandwidth Product | 500 kHz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2054HVHS5#TRMPBF Overview
The linear amplifier is packaged in a SOT-23-5 Thin, TSOT-23-5 case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Zero-Drift-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. In this case, there are 5 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 500nV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 175μA and 10 . During the manufacturing process, this buffer amplifier is divided into 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. As a whole, there are 1 elements that make up this buffer amplifier. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
LTC2054HVHS5#TRMPBF Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2054HVHS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2054HVHS5#TRMPBF Instrumentational OP Amps applications.
- ECG equipment
- Integrator circuits
- single/dual op amp sum and difference circuits
- Computer workstations
- Division circuits
- Proportional counter tubes
- Thermocouples
- Portable media players
- Band-pass filter
- Polarized electrodes
