LTC2054HVHS5#TRPBF
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LTC2054 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 175μA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Gain Bandwidth Product | 500kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 500 kHz |
| Average Bias Current-Max (IIB) | 0.003μA |
| Low-Offset | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | YES |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Input Offset Current-Max (IIO) | 0.0007μA |
| Voltage Gain-Min | 120 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
LTC2054HVHS5#TRPBF Overview
Packaging for the buffer amplifier is in the form of a SOT-23-5 Thin, TSOT-23-5 case. Op amps are Zero-Drift types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. A total of 5 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 5. I would like to remind you that this buffer op amp should be powered by an 5V battery. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. The buffer amp consists of 1 circuits in total. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. A supply of 175μA or higher is recommended for use with this electronic part. There is a minimum voltage gain of 120 that this buffer op amp is capable of conducting.
LTC2054HVHS5#TRPBF Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC2054HVHS5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2054HVHS5#TRPBF Instrumentational OP Amps applications.
- Portable docking station
- Power generator
- Displayers for aircraft and air transportation control systems
- Computer workstations
- E-book readers
- Micro signal measurement
- RF cable systems
- High gain DC amplifier
- Exponential operation circuits
- Communication device
