LTC2054MPS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2054 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 145μA |
| Slew Rate | 0.5V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Input Offset Voltage (Vos) | 500nV |
| Unity Gain BW-Nom | 500 kHz |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | YES |
| Nominal Gain Bandwidth Product | 500 kHz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2054MPS5#TRMPBF Overview
There is a SOT-23-5 Thin, TSOT-23-5 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Zero-Drift-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 5h termination of the year. In this case, there are 5 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 5 pins that make up the linear amplifier. Op amp rates 500nV as input offset voltage. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -55°C~150°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 145μA, this op amp ic can operate. There are 1 circuits on op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier consists of 1 different elements in total. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
LTC2054MPS5#TRMPBF Features
5 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC2054MPS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2054MPS5#TRMPBF Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Portable media players
- Active probe
- Video computer boards
- Signal transformation
- Medical imaging
- Weak signal detection
- Weighing systems
- Communication
- Navigation
