LTC2055CMS8#PBF

2 Channels 1pA 120 dB Instrumentational OP Amps 5V MSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LTC2055CMS8#PBF
Package: MSOP
Datasheet: PDF
Stock: 696
Description: 2 Channels 1pA 120 dB Instrumentational OP Amps 5V MSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	MSOP
Number of Pins	8
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Operating Supply Voltage	5V
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2.7V
Operating Supply Current	130μA
Slew Rate	0.5 V/μs
Common Mode Rejection Ratio	120 dB
Current - Input Bias	1pA
Input Offset Voltage (Vos)	500nV
Bandwidth	500 kHz
Gain Bandwidth Product	500 kHz
Voltage Gain	140dB
Power Supply Rejection Ratio (PSRR)	120dB
Nominal Gain Bandwidth Product	500 kHz
Number of Amplifiers	2
Height	860μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LTC2055CMS8#PBF Overview

In the package, you will find a MSOP-case to contain the op amp ic. 8 pins are available on the instrumentation amplifier. Op amp rates 500nV as input offset voltage. As long as the supply current of the chip does not exceed 130μA, this op amp ic can operate. 140dB should be the voltage gain. There are 2 circuits on op amps. There are a total of 2 channels available on the op amps. The temperature should not be lower than 0°C for operational amplifier ics to operate. It is recommended that op amp be used at temperatures below 70°C. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. As you can see, the linear amplifier has 2 amplifiers.