LTC2057HVHMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2057 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-2.5/+-30V |
| Number of Circuits | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 0.45V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 150 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~60V ±2.38V~30V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1500 kHz |
| Average Bias Current-Max (IIB) | 0.006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32.5V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -32.5V |
| Power | NO |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2057HVHMS8#PBF Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Zero-Drift-type. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 500nV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. Operational amplifier can operate supply current at 900μA. This op amp contains 1 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LTC2057HVHMS8#PBF Features
8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
LTC2057HVHMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2057HVHMS8#PBF Instrumentational OP Amps applications.
- Hand-held batteries
- Logarithmic operation circuits
- Digital cameras
- High speed sample
- Ultrasound transducers
- Switching amplifier
- PDA
- Band-stop filter
- Tablets
- Precision measurement
