LTC2057IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2057 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 900μA |
| Slew Rate | 0.45V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~36V ±2.38V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500nV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00036μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Power | NO |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2057IDD#PBF Overview
There is a 8-WFDFN Exposed Pad case package that contains the instrumentation amplifiers. Op amps are Zero-Drift types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. The input offset voltage is 500nV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 900μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 150dB. Instrumentation amplifier has 1 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LTC2057IDD#PBF Features
8 Pins
supply voltage of 15V
150dB voltage gain
Output Type: Rail-to-Rail
LTC2057IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2057IDD#PBF Instrumentational OP Amps applications.
- Precision measurement
- Signal operation
- Video conversion and routing
- Portable media players
- PDA
- Blood pressure sensors
- Car stereo
- Information processing
- Navigation
- Television
