LTC221CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC221 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 5V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 90Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns |
| Charge Injection | 8pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 300ns |
| Normal Position | NC |
| Height Seated (Max) | 1.752mm |
| Length | 9.906mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC221CS#PBF Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 16. By its 4 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. There are 16 pins injected into the electronic part body. SPST - NC switching circuits are used in these analog switch ics. Try searching with LTC221 to find analog multiplexer variants. In this multiplexer, the internal resistance is 90Ohm. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 5V operating voltages are supported by the electronic component.
LTC221CS#PBF Features
4 Channels
Switch Circuit: SPST - NC
LTC221CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC221CS#PBF Analog Switches & Multiplexers ICs applications.
- Cell phones
- Industrial control systems
- Access Concentrators
- Multiplexers
- Avionics
- Fault Tolerant Systems
- Precision data acquisition
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- E1 Multiplexer
- USB 1.1 signal switching circuits
