LTC2431CMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| Series | microPOWER™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2431 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 200μA |
| Number of Bits | 20 |
| Input Type | Differential |
| Architecture | Sigma-Delta |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 2.5 B |
| Sampling Rate | 7.5 sps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 7.5 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.002% |
| Analog Input Voltage-Max | 5.8V |
| Analog Input Voltage-Min | 2.4V |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2431CMS#PBF Overview
The analogue to digital converter is designed with 20 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 7.5 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC2431 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Single.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 5.8V.The ADC converter operates from 3/5V power supplies.The minimal analog input voltage of this electrical AD converter is 2.4V.The ADC converter consists of 1 elements.It is a type of FPGA belonging to the microPOWER? series.
LTC2431CMS#PBF Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
microPOWER? series
LTC2431CMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2431CMS#PBF ADC applications.
- Cell Phones
- Handheld Terminal Interface
- 4-channel data acquisition
- Smart antenna systems
- Digital beam-forming systems for ultrasound
- Medical Imaging
- Audio/Video devices
- Communication test equipment
- Multicarrier, multimode digital receivers
- Industrial Process Control
