LTC2485CDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Selectable Address, Temperature Sensor |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2485 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | MUX-ADC |
| Interface | I2C, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 160μA |
| Number of Bits | 24 |
| Input Type | Differential |
| Architecture | Sigma-Delta |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | I2C |
| Resolution | 3 B |
| Sampling Rate | 6.8 sps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 7.5 |
| Output Bit Code | BINARY, 2'S COMPLEMENT BINARY |
| Analog Input Voltage-Max | 6V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2485CDD#PBF Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 10-WFDFN Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 7.5 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC2485 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 6V.The ADC converter operates from 3/5V power supplies.Selectable Address, Temperature Sensor can be ensured when operating.The ADC converter consists of 1 elements.
LTC2485CDD#PBF Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
LTC2485CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2485CDD#PBF ADC applications.
- Digital beam-forming systems for ultrasound
- 4-channel data acquisition
- In-building wireless telephony
- Transducer
- AC motor control
- Communication test equipment
- Multicarrier, multimode digital receivers
- Multiplexed Data Acquisition Systems
- Data Acquisition Systems
- TD-SCDMA, WiMAX
