LTC2851CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2851 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 1mA |
| Data Rate | 20Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 2 V |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC2851CMS8#PBF Overview
Due to the enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Any Surface Mount-type PCB or development board can be used with this wide receiver.A differential driver like this uses 3V~3.6V of power.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.With a supply voltage range of 3.3V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.It is packaged with 8 pinouts that are market standard for this particular transceiver.This part number LTC2851 can be used to search for more variants based on the product type, temperature, package, etc.8-pin driver chip with enhanced power dissipation.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.Using this ic receiver, you were able to achieve a resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.There is a 3.3V input voltage supply that can be used to operate this transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers implemented in this module isolated transceiver.
LTC2851CMS8#PBF Features
Tube package
8 pin count
8 pins
LTC2851CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2851CMS8#PBF Drivers/Receivers/Transceivers applications.
- Military satellite communications
- High-speed computer links
- Gigabit Ethernet
- transmission relay
- Automation systems
- Wireless showroom
- SONET/SDH Network
- Wireless access points
- Desktop radio
- Satellite ground stations
