LTC2858CMS-1#PBF
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2858 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Data Rate | 20Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.004A |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
LTC2858CMS-1#PBF Overview
This LED driver IC features an enhanced 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package for driving common LEDs.In the Tube package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Wide receiver can operate within the range of 5V supply voltages efficiently.10 terminations are integrated into this wide receiver for driving and receiving signals from data.Transceiver comes with 10 standard pinouts that meet the market's requirements.You can search with LTC2858 to get more variants of this part, since it identifies the product type, temperature, package, etc.10-pin driver chip with enhanced power dissipation.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.This driver IC is designed to operate from a 5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.
LTC2858CMS-1#PBF Features
Tube package
10 pin count
10 pins
5V power supply
LTC2858CMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2858CMS-1#PBF Drivers/Receivers/Transceivers applications.
- Sensor reporting
- Pocket PC
- TV signal transmission
- Cordless telephone
- AV receiver
- IP cameras
- Interconnection between switches and computers
- Switching system
- Telecom applications
- Televisions
