LTC2858IMS-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2858 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Data Rate | 20Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Interface Standard | EIA-485-A; TIA-485-A |
| Receive Delay-Max | 70 ns |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.004A |
| Number of Transmitters | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2858IMS-1#PBF Overview
The enhanced 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package makes it an excellent LED driver.The receiver is packaged in a Tube package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver requires a 4.5V~5.5V power supply.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The transceiver is packaged with 10 market standard pinouts so that it can be easily used.The base part number LTC2858 identifies the product type, temperature, package, etc., so you can search for more variants by using it.The driver IC has improved power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.In the case of this receiver, a resolution of 1 bits is typically specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.In telecommunications, transmitters generate radio waves in order to transmit or send data through an antenna to transmit or send data using radio waves.
LTC2858IMS-1#PBF Features
Tube package
10 pin count
10 pins
5V power supply
LTC2858IMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2858IMS-1#PBF Drivers/Receivers/Transceivers applications.
- LAN, SAN, WAN (local, storage, work area networks)
- Mainframes, workstations or storage devices
- Data center
- Metro access rings
- Wireless 3D game
- Wireless interactive experience
- Transmission stations
- Wired telephone
- Laser diode bonding
- Tuner
