LTC2862CS8-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2862 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3.3V |
| Nominal Supply Current | 8mA |
| Data Rate | 20Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 150mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 65 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.003A |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2862CS8-1#PBF Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A differential driver like this uses 3V~5.5V of power.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.This wide receiver has 8 terminations for driving and receiving data signals.In this package, you will find 8 market-standard pinouts for this transceiver.The base part number LTC2862 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 8-pin driver IC with enhanced power dissipation control is featured here.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 5V required for the operation of this integrated circuit.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC that is designed to operate from a 3.3V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.
LTC2862CS8-1#PBF Features
Tube package
8 pin count
8 pins
3.3V power supply
LTC2862CS8-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2862CS8-1#PBF Drivers/Receivers/Transceivers applications.
- Wireless network systems
- Low power, low voltage systems
- Radio transmission
- Desktop PC
- SONET/SDH Network
- Ship
- Precision engineering measurement
- AV receiver
- Clock radio
- 1x/2x Fiber Channel
