LTC2862HDD-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2862 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3.3V |
| Nominal Supply Current | 8mA |
| Data Rate | 20Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 150mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 65 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.003A |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2862HDD-1#PBF Overview
Due to the enhanced 8-WFDFN Exposed Pad package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tube format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 3V~5.5V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.For applications where the operating temperature is -40°C~125°C, this ic receiver was designed primarily.An operating voltage range of 3.3V is suitable for this line driver ic.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.In this package, you will find 8 market-standard pinouts for this transceiver.Since the part number LTC2862 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control driver IC featuring 8 pins.It was possible to achieve a 1-bit resolution through this ic receiver.This receiver is typically specified with a resolution of 1 bits. This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 3.3V power supply, and only one driver IC in total.The module isolated transceiver implements a total of 1 transceivers.
LTC2862HDD-1#PBF Features
Tube package
8 pin count
8 pins
3.3V power supply
LTC2862HDD-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2862HDD-1#PBF Drivers/Receivers/Transceivers applications.
- LAN, SAN, WAN (local, storage, work area networks)
- Datacom networking applications
- WDM transmission
- Copper connection network
- IPTV front end
- Satellite communications networks
- AV receiver
- Long-distance fiber optic network applications
- 1x/2x Fiber Channel
- Sensor reporting
