LTC2862HDD-2#PBF
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC2862 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3.3V |
| Nominal Supply Current | 8mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 150mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 65 ns |
| Simplex/Duplex | Half Duplex |
| Output Low Current-Max | 0.003A |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
LTC2862HDD-2#PBF Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-WFDFN Exposed Pad package.The package of this receiver is Tube.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.With respect to the power supply, this differential driver uses 3V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~125°C.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.For more variants of this part, try searching with the base part number LTC2862, which indicates the product type, temperature, package, etc.An enhanced power dissipation control is provided by this 8-pin driver IC.It provided a 1-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 3.3V.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.
LTC2862HDD-2#PBF Features
Tube package
8 pin count
8 pins
3.3V power supply
LTC2862HDD-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2862HDD-2#PBF Drivers/Receivers/Transceivers applications.
- AV receiver
- Mainframes, workstations or storage devices
- IP cameras
- Structural bonding
- Data center
- Switching system
- Datacom networking applications
- Wireless security systems
- Optical sub-assembly (OSA)
- Wireless interactive experience
