LTC2908CTS8-B1#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LTC2908 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3.3V |
| Number of Channels | 6 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 500mV |
| Nominal Supply Current | 24μA |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | 1.403V 1.683V 2.338V 3.086V Adj Adj |
| Number of Voltages Monitored | 6 |
| Reset Timeout | 160ms Minimum |
| Threshold Voltage | 0.51.41.62.33 |
| Height Seated (Max) | 1mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2908CTS8-B1#TRMPBF Overview
As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 6 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-8 Thin, TSOT-23-8 functions for your convenience. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 250 for the package during reflow. IC management conducts in a 3.3V-voltage supply. When a supply voltage of 6 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 500mV, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to 0°C~70°C TA degrees. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using LTC2908, the base power ics number. This power management requires 3.3V power to work.
LTC2908CTS8-B1#TRMPBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 500mV
LTC2908CTS8-B1#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2908CTS8-B1#TRMPBF Voltage Supervisors applications.
- Military electronics
- Sensitive sensors
- Fire equipment power monitoring system
- Smartphones
- Set top box
- Urban rail transit weak current power monitoring
- Rechargeable batteries
- Medical-specific insulation monitor
- FPGA design
- Refrigeration
