LTC2910IDHC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2910 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Max Supply Voltage | 6.9V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 50μA |
| Adjustable Threshold | YES |
| Reset | Active High/Active Low |
| Voltage - Threshold | 8 Selectable Threshold Combinations |
| Number of Voltages Monitored | 8 |
| Reset Timeout | 6ms Minimum |
| Supply Current-Max (Isup) | 0.1mA |
| Length | 5mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2910IDHC#PBF Overview
Power management is mounted through 16 terminals. Packaging is in the form of a Tube. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 8 channels which are available in a series format. Please find attached 16-WFDFN Exposed Pad functions for your reference in this IC power. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 8 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 16. 16 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 2.3V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.9V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use LTC2910, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3.3V power to power this power management.
LTC2910IDHC#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V
LTC2910IDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2910IDHC#PBF Voltage Supervisors applications.
- Set top box
- Smartphones
- Magnetic resonance imaging
- Military communications
- Military electronics
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Solar power charger
- Microprocessor system
- Rechargeable batteries
