LTC2910IGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2910 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Max Supply Voltage | 6.9V |
| Min Supply Voltage | 2.3V |
| Adjustable Threshold | YES |
| Reset | Active High/Active Low |
| Voltage - Threshold | 8 Selectable Threshold Combinations |
| Number of Voltages Monitored | 8 |
| Reset Timeout | 6ms Minimum |
| Supply Current-Max (Isup) | 0.1mA |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LTC2910IGN#TRPBF Overview
As you can see, this power management is mounted through 16 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 8 channels that can be found. In this IC management you will find 16-SSOP (0.154, 3.90mm Width) functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. A supply voltage of 8 is used to conduct the PMIC chip. There is a subcategory called Power Management Circuits for this power management. In total, it has 16 pins on IC management. The pins of the power management system count 16. It is recommended that Vsup should not be less than 2.3V for this IC power. There should be no more than 6.9V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. It is always advisable to use LTC2910, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 3.3V watts of power to operate this voltage supervisor.
LTC2910IGN#TRPBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V
LTC2910IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2910IGN#TRPBF Voltage Supervisors applications.
- Computer applications
- Kitchen appliances
- WiFi router
- Magnetic resonance imaging
- Detection of phase loss
- Microprocessor system
- Embedded computing
- Cloud computing
- Set top box
- DSP
