LTC2913CMS-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2913 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.9V |
| Min Supply Voltage | 2.3V |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Number of Voltages Monitored | 2 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.08mA |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2913CMS-1#PBF Overview
This power management consists of 10 mounting terminals on which it can be mounted. It is packaged with Tube. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power management conducts at a voltage of 2. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 10 pins. This power management has 10 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.3V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 6.9V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to 0°C~70°C TA degrees. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. You can always use LTC2913, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3.3V volts of power.
LTC2913CMS-1#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V
LTC2913CMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2913CMS-1#PBF Voltage Supervisors applications.
- Household appliances
- Satellite navigation
- Stable power system
- Power distribution systems of operating room
- Important electronics for automotive safety
- Insulation fault location system
- Power communication system
- Battery-powered equipment
- Unattended substation automation
- Efficient information transmission
