banner_page

LTC2913IDD-1#PBF

3.3V10 Terminals 10-Pin LTC2913 Voltage supervisor1 Channels Min 2.3V Max 6.9V


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC2913IDD-1#PBF
  • Package: 10-WFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 394
  • Description: 3.3V10 Terminals 10-Pin LTC2913 Voltage supervisor1 Channels Min 2.3V Max 6.9V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type Surface Mount
Package / Case 10-WFDFN Exposed Pad
Surface Mount YES
Number of Pins 10
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2007
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC2913
Output Open Drain or Open Collector
Pin Count 10
Power Supplies 3.3V
Number of Channels 1
Max Supply Voltage 6.9V
Min Supply Voltage 2.3V
Adjustable Threshold YES
Reset Active Low
Number of Voltages Monitored 2
Reset Timeout Adjustable/Selectable
Supply Current-Max (Isup) 0.08mA
Height Seated (Max) 0.8mm
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LTC2913IDD-1#PBF Overview


This voltage supervisor has a total of 10 mounting terminals that can be used for mounting. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of 10-WFDFN Exposed Pad functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 3.3V supply voltages. A supply voltage of 2 is used to conduct the PMIC chip. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 10 pins. This power management system has 10 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.3V volts. There should be no more than 6.9V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC2913, which is the base power ics number. This power management requires 3.3V power to work.

LTC2913IDD-1#PBF Features


Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V

LTC2913IDD-1#PBF Applications


There are a lot of Linear Technology/Analog Devices LTC2913IDD-1#PBF Voltage Supervisors applications.

  • Stable power system
  • Automotive permanent magnet synchronous motors
  • Smartphones
  • Electrical fire monitoring system
  • Sensitive sensors
  • Digitally controlled LDO regulators circuit
  • Household appliances
  • Detection of phase sequence
  • Leakage protection
  • Important electronics for automotive safety

Write a review

Note: HTML is not translated!
    Bad           Good