LTC2917CMS-A1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2917 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Nominal Supply Current | 30μA |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | 27 Selectable Threshold Combinations |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC2917CMS-A1#PBF Overview
There are 10 terminals on this power management that allow it to be mounted. Packaged in a Tube-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 2.5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 10 pins in it. This power management system has 10 pins. Supply voltage (Vsup) should be at least 800mV for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. To find similar IC managements from the manufacturer, you can always search by LTC2917. The voltage supervisor requires a power source of 2.5V volts in order to work correctly.
LTC2917CMS-A1#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
LTC2917CMS-A1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2917CMS-A1#PBF Voltage Supervisors applications.
- Embedded computing
- Low voltage/high power - AI, GPU
- Consumer electronics
- Leakage protection
- Efficient information transmission
- Utility meter
- Smartphones
- Kitchen appliances
- DSP
- Power communication system
