LTC2918CMS-B1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2918 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Nominal Supply Current | 30μA |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | 27 Selectable Threshold Combinations |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2918CMS-B1#PBF Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 2.5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 10 pins. Pin count of the power management is 10. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using LTC2918, the base power ics number. It requires 2.5V watts of power to operate this voltage supervisor.
LTC2918CMS-B1#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
LTC2918CMS-B1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2918CMS-B1#PBF Voltage Supervisors applications.
- Magnetic resonance imaging
- Detection of phase sequence
- Medical-specific isolation transformer
- Linux and server computing
- Important electronics for automotive protection
- Important electronics for automotive safety
- Radio
- Power communication system
- Functional modules
- Automotive power systems
