LTC2918HMS-A1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2918 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Nominal Supply Current | 30μA |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | 27 Selectable Threshold Combinations |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC2918HMS-A1#PBF Overview
This voltage supervisor has a total of 10 mounting terminals that can be used for mounting. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. When 2.5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. A total of 10 pins are located on this power management. There are 10 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 800mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using LTC2918, the base power ics number. It requires 2.5V watts of power to operate this voltage supervisor.
LTC2918HMS-A1#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
LTC2918HMS-A1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2918HMS-A1#PBF Voltage Supervisors applications.
- Satellite navigation
- Utility meter
- Radar
- Network equipment
- DSP
- Consumer electronics
- DC stabilized power supply module
- Unattended substation automation
- Computer applications
- Detection of phase imbalance
