LTC2918IDDB-A1#TRMPBF
| Parameters | |
|---|---|
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2918 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | 27 Selectable Threshold Combinations |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
LTC2918IDDB-A1#TRMPBF Overview
There are 10 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 10-WFDFN Exposed Pad functions for you to refer to. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 2.5V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 10. 10 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Additionally, IC management are a variety of features, for example [0], to name a few. For similar manage ics search of the manufacturer, you can always refer to LTC2918, the base PMIC number. It is necessary to have 2.5V volts of power in order for this voltage supervisor to operate.
LTC2918IDDB-A1#TRMPBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
LTC2918IDDB-A1#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC2918IDDB-A1#TRMPBF Voltage Supervisors applications.
- Magnetic resonance imaging
- Military electronics
- Satellite navigation
- Detection of phase imbalance
- Consumer electronics
- Multi-voltage system
- Insulation fault location system
- FPGA design
- Efficient information transmission
- Power communication system
