LTC2919CMS-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2919 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 500mV |
| Nominal Supply Current | 50μA |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | 4.425V Adj Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.22mA |
| Height Seated (Max) | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC2919CMS-5#PBF Overview
There are 10 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 3 is used to conduct the PMIC chip. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 10. There are 10 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 500mV. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC2919, which is the base power ics number. It requires 5V watts of power to operate this voltage supervisor.
LTC2919CMS-5#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 500mV
LTC2919CMS-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2919CMS-5#PBF Voltage Supervisors applications.
- emergency room
- Refrigeration
- Power communication system
- Important electronics for automotive safety
- Automotive permanent magnet synchronous motors
- Military electronics
- Consumer electronics
- Medical-specific insulation monitor
- Electric heating appliances
- Fire equipment power monitoring system
