LTC3112IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3112 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Voltage - Input (Max) | 15V |
| Output Voltage | 14V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2.5A |
| Max Output Voltage | 14V |
| Voltage - Output (Min/Fixed) | 2.5V |
| Topology | Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.5V |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3112IFE#PBF Overview
A Tube package is used in this voltage regulator to optimize performance. A voltage regulator consists of 20 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. For space-saving purposes, this voltage regulator is available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. There are 1 outputs configured on the voltage regulator. There are output pins on this DC DC switching regulator that generate Adjustable output. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. This DC-DC switching regulator has a switching frequency of 750kHz. Despite its low input voltage, this voltage regulator can operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 2.5V. This voltage regulator 12v features maximum design flexibility thanks to its 2.5A output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 15V. Its 225 peak reflow temperature makes this regulator essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 5V for the purposes of operation. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. This DC/DC regulator belongs to the LTC3112 family. The adjusting voltage regulator's output voltage is maintain at 14V. There are 20 pins that are used for the operation of the voltage regulator 12v. This voltage regulator 12v should be configured with an output voltage that is at least 2.5V. There is a maximum output voltage of 14V from this voltage regulator 12v.
LTC3112IFE#PBF Features
1 outputs
Peak reflow temperature (Cel) of 225
20 pins
LTC3112IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3112IFE#PBF Voltage Regulators applications.
- Wind power
- Serial communication converter
- seismic instrument power circuits
- Sensitive electronic devices
- Motor controller circuits
- Remotely powered electric motors
- Smoke prevention equipment
- Arc suppression circuits
- Handheld GPS
- ATMs
